Model |
TH2515 |
Display |
Display |
24-bit, 400 X 272 and touch TFT LCD screen |
Reading Digits |
5 digits |
Resistance Measurement |
Measurement Range |
0.1¼ --110M |
Resistance Range |
Current |
Resolution |
*Accuracy ±(ppm of Rd + ppm of Fs) |
20 m |
1A |
0.1¼ |
2500+10 |
200m |
1¼ |
2500+10 |
200m |
100mA |
1¼ |
3500+10 |
2 |
100mA |
10¼ |
350+10 |
Model |
TH2515 |
20 |
10mA |
100¼ |
250+10 |
200 |
1m |
100+10 |
2k |
1mA |
10m |
100+10 |
20k |
100¼A |
100m |
100+5 |
100/200k |
1 |
100+30 |
1/2M |
10¼A |
10 |
200+10 |
10M |
1¼A |
100 |
1000+60 |
100M |
100nA |
1k |
8000+600 |
Measurement Function |
Resistance Measurement Time |
FAST: 7ms; MED: 22ms; SLOW1: 102ms; SLOW2: 402ms
Above data is correct when DISPLAY is OFF. When DISPLY is ON, 20ms should be added.
|
Temperature Measurement Time |
100 ± 10ms |
Test Terminal |
4-terminal |
Average Setup |
|
Zero Clearing |
|
Range Switch |
AUTO and Manual |
Trigger Mode |
Internal, Manual, External, BUS |
Power Frequency Selection |
Ë (avoid the interference of the power noise) |
Setting Data Storage |
30 groups |
Low Voltage Measurement |
Open voltage 60mVEffective range: 2, 20, 200, 2k |
Thermal Electromotive Force Elimination |
Ë |
Statistics Function |
AVG, MAX, MIN, OSD(Overall standard deviation) SSD(Sample standard deviation) Process capacity index (Cp, CpK) |
Measurement Error Detection |
Ë (Detect the measurement cable has been connected correctly or not.) |
Multipole Connector |
Ë(Noise abatement function of high-resistance is optional) |
Beep State |
Comparator, Bin compare, Button |
Key Lock |
Ë |
Temperature Measurement |
Temperature Measurement1 |
-10.0--99.9 Sensor¼PT500 |
Temperature Measurement2 |
Analog input¼0V--2V Display¼-99.9 -- 999.9 |
Temperature Compensation |
(Convert the resistance measurement value to that one measured under preset temperature) |
Temperature |
(Temperature rising is gained from resistance test values before and after warming) |
Compare Judge |
Comparator |
Signal Output |
HI/IN/LO |
Beep |
Beep mode¼OFF¼IN¼HI/LO |
Limit Setup Mode |
Absolute value high/low limit Percentage high/low limit +nominal value |
Sorting |
10 bins, absolute value/ percentage |
External Trigger Delay Time |
AUTO: dependent on range, low voltage mode ON/OFF OVC (offset voltage compensation) ON/OFF MANUAL: 0.000--9.999s |
External Input Trigger |
Rising/Falling edge |
Interface |
Interface |
USB DEVICEUSB HOSTRS232CHANDLERGPIB¼ËOPTION¼ |
General Specification |
Working Condition |
Temperature:0 - 40¼Humidity: 80%RH |
Storage Condition |
Temperature:-10-50,Humidity: 90%RH |
Accuracy Guarantee Condition |
Temperature:18 - 28¼Humidity: 80%RH |
Power |
Voltage |
99V242V |
Frequency |
47.5Hz63Hz |
Consumption |
30 VA |
Dimension |
215mm87mm335mm¼Ënet size¼ 235mm105mm360mm¼Ëwith foam sheath¼ |
Weight |
Approx. 3.6kg |